Filter
Top Products
4
PREPARATION FOR USE
Unpacking And Set Up
• Remove the main unit, the speakers, and the remote control unit from the
display carton. Remove all packing materials from the components. We
recommend that you save the original carton and packing material if possible,
in the event that your system even needs to be returned for service. Using the
original carton and packing materials is the only way to protect your system
from shipping damage.
• Press on the CD door in the area marked OPEN/CLOSE to open the door.
Remove the “dummy CD” transit protection card from the CD player and discard
it.
• Unwind the AC power cord and extend it to its full length.
• Unwind the external FM wire antenna and extend it to its full length.
• Remove the twist-ties from the speaker wires.
Placement of the System
The system should be placed on a stable, level surface such as a table, desk, or
shelf, convenient to an AC outlet, away from direct sunlight, and sources of excess
heat, dust, moisture, humidity, vibration, or strong magnetic fields.
The speakers may be placed next to the main unit or as far apart as the speaker
wires allow. We recommend that you leave a gap of approximately 1/2 inch between
the main unit and the speakers so that any vibration from the speakers will not
interfere with the CD player in the main unit.
ES128_042806.p65 28/4/2006, 11:394