Emerson AV300 Home Theater System User Manual


 
POSITIONING THE SPEAKERS
Refer to the following speaker positioning diagram. All 5 satellites should be approximately the same distance from your listening
position.
Place center speaker either directly above or below your TV screen.
Place front left and right speakers to the left and right of TV at approximately same height as center speaker.
Place rear left and right speakers either in line with, or behind your listening position, at ear level, or slightly above, when
seated.
Place subwoofer on floor in front of room, either next to TV or in corner, facing your listening position.
DVD PLAYBACK
1. Turn on your TV. If necessary use your TV remote to select the external video source such as AUX, VIDEO, etc.
2. Press the STANDBY button on the AV300 remote control. The Emerson DVD logo screen should appear on your TV.
3. Press the OPEN/CLOSE button on the AV300 remote control or front panel. Drawer opens. (Note: Remote must be pointed at
front of AV300 to operate.)
4. Insert DVD movie disc in tray with printed side up. Press OPEN/CLOSE button to close drawer. Player will read disc. On
some discs playback will start automatically. On other discs the DVD Menu Screen appears. Press PLAY/PAUSE button to
begin playback, or use 'arrow' buttons and ENTER button to select other playback options from DVD menu.
5. If disc has Dolby Digital, Dolby Pro Logic, or DTS soundtrack, you will hear sound from all 5 satellites plus subwoofer. If disc
has stereo soundtrack you may only hear sound from front left and right speakers plus subwoofer.
6. Press ADJ/VOL (Adjust Volume) "+" or "" buttons to adjust volume level.
7. When finished watching press STOP and/or OPEN CLOSE. Remove disc, press STANDBY to turn off AV300. The STANDBY
indicator turns 'On'. Also turn off your TV.
Surround-left
Surround-right
Center
Front-left
Front-right
Subwoofer
or
oror
LISTENING
POSITION