Filter
Top Products
12.
RADIO OPERATION
FM / FM-STEREO RECEPTION
GENERAL OPERATION
FOR BETTER RECEPTION
- Set the “BAND” selector to FM mode for MONO reception.
- Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show
FM ST. mode
FM - The receiver has a built - in FM wire antenna located from the rear cabinet. This wire be completely
unraveled and extended for best reception.
AM - This appliance is equipped with a built - in directional ferrite antenna. Rotate the unit to get the best
reception.
1. Set the “FUNCTION” selector to “RADIO” mode.
2. Select desired band by using the “BAND” selector.
3. Adjust radio frequency to your desired station by using the “TUNING” control.
4. Adjust the “VOLUME” control to the desired level.
CD OPERATION
GENERAL OPERATION
PLAY / PAUSE Press to start playing CD disc.
Press again to stop playing CD operation temporarily.
Press again to resume playback.
SKIP + &
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of the sound.
STOP
Press to stop all CD operation.
PREPARATION FOR USE
INSTALLATION
CONNECTIONS
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections
have been made.
• Do not cover any vents and make sure that there is a space of several centimetres around the unit for
ventilation.
1) Connect left and right speaker to left and right speaker jacks.
2) Before connecting the unit to the mains, make sure that the AC voltage printed on the back plate is the
same as the AC voltage from your wall outlet.