Filter
Top Products
Congratulations on your ElectroVoice PA series power amplier purchase! The ElectroVoice PA-Series
power amp line combines outstanding audio performance, exceptional reliability and secure operational
safety in a compact 2RU chassis design.
All models in the PA Series provide several protection circuits which not only prevent the power
amplier itself but also the connected loudspeaker systems from being damaged. These protections
include Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection and Thermal Overload
Protection. All PA-Series power amps feature different hi-pass lters with switch selectable cut-off
frequency to attenuate unwanted low-frequency signals.
Innitely variable low-noise high performance fans guarantee absolute thermal stability while keeping fan
noise to a minimum. Direct “ow-thru” chassis design allows for a smooth ow of air from front-to-rear,
which allows trouble-free operation even in smaller amp-racks.
Compact high density power supply units with low-leakage toroidal transformers provide extensive
headroom far above the listed power rating. Premium phoenix style screw-lock connectors prevent
accidental disconnection resulting in a more secure connection of audio signal and speaker cables.
All PA series “T” version models are equipped with high performance output transformers also provide
oating outputs for 50V, 70V and 100V installations. These models also provide voltage limiters to
protect the loudspeaker outputs against over-voltage.
Unpacking & Warranty
Carefully open the packaging and take out the power amplier. Next to the power amplier itself, the
package also includes this owner’s manual, a mains cord, a warranty certicate, four attachable feet as
well as screwlock connectors for all inputs and outputs. The warranty period is 36 months starting
from the date when receiving the appliance from the dealer. Keep the original invoice, which states
the purchase/delivery date together with the warranty certicate at a safe place.
Installation Notes
First of all, please make sure to check that the voltage selector on the amp’s rear is set to the correct
position matching the installation site’s local mains voltage.
Generally, installing or mounting power amps should be carried out in a way that guarantees continuously
unopposed front-to-rear air circulation. When including an appliance in a closed cabinet or rack shelf
system make sure to provide sufcient ventilation. Leave an air duct of at least 2.5“ x 13“ (up to
the cabinet’s top ventilation louvers) for air circulation between the rear of the power amplier and
the cabinet’s/rack’s rear wall. Make sure to leave at least 4“ of space above the cabinet or rack
shelf system. Since temperatures inside of a cabinet or rack shelf system can easily rise up to 105 degrees
during operation, carefully considering the environmental temperature maximum values of all other
appliances installed in the same rack shelf system is mandatory (also refer to “Mains Operation &
Resulting Temperature”).
When installing the power amp in a cabinet or rack shelf system, make sure to make use of the
rear mounting facilities to x the appliance in place and keep the front panel from bending. If
this is not possible, please use mounting-rails instead.
Caution: For problem-free operation do not exceed the environmental temperature maximum
of 105 Deg. F.
The power amplier has to be protected against: moisture (dripping or splashing water), direct sunlight,
high temperatures or the direct inuence of heat sources, high humidity, extensive dust and vibrations.
Condensation on internal parts may occur after transporting the power amplier from a cold into a warmer
environment. In that case operation is only permissible after the appliance has gained the new temp-
erature (after approximately one hour). If objects or liquids have intruded the power amp’s enclosure,
disconnect the appliance from the mains immediately and contact an authorised service center for
inspection before continuing to operate the unit.
Do not use any sprays or solvents for cleaning the appliance, because they might severely damage
the surface of the enclosure or lead to dangerous re hazard.
DESCRIPTION
4