Filter
Top Products
Electro-Voice EVF/EVH User Manual 31
Figure 21a:
Basic three-enclosure vertical hang of
an EVF subwoofer on top and two EVF
full-range systems below, using one each
VRK-1 and VRK-2 kits (optional acces-
sories) and four eyebolts (supplied with
systems), using a moderate trim angle
5.0 EVF and EVH Rigging System (cont’)
EVF Full-Range
System
VRK-1 Kit
(Sold Separately)
EVF Subwoofer
EVI-M10K Kit
VRK-2 Kit
(Sold Separately)
Figure 21b:
Basic three-enclosure vertical hang of
an EVF subwoofer on top and two EVF
full-range systems below, using one each
VRK-1 and VRK-2 kits (optional acces-
sories) and four eyebolts (supplied with
systems), using a more extreme trim angle
Figure 21c:
Basic three-enclosure vertical hang of
an EVF subwoofer on top and two EVF
full-range systems below, using one each
VRK-1 and VRK-2 kits (optional acces-
sories) and four eyebolts (supplied with
systems), using an extreme trim angle
5.22 VRK Kits and Vertically Rigged Clusters
A basic three-enclosure vertical hang is shown in Figure 21. The following components are necessary to
construct this cluster:
1. One VRK-1 vertical rigging kit for EVF to EVF.
2. One VRK-2 vertical rigging kit for EVF to EVF subwoofer.
3. Four M10 eyebolts from the supplied EVI-M10K eyebolt kit (to suspend the top cabinet).
Stabilizer Bars