EAW MQ1215 Speaker User Manual


 
SPECIFICATIONS MQ1215
DIMENSIONAL DRAWING
INPUT PANEL
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. MQ1215/0004850/001/2 pp September 2002 Printed in USA
The low frequency loudspeaker system shall incorporate two
15 inch LF transducers. The LF drivers shall be mounted in
separate vented subenclosures tuned for optimum low fre-
quency response.
System frequency response shall vary no more than ±3 dB from
50 Hz to 1300 Hz measured on axis. The loudspeaker shall
produce a sound pressure level of 100 dB SPL on axis at 1
meter with a power input of 1 watt, and shall be capable of
producing a peak output of 138 SPL on axis at 1 meter. The
loudspeaker shall handle 2x 800 watts of amplifier power (AES
Standard) and shall have a nominal impedance of 2x 8 ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of exterior grade Baltic birch plywood
and shall employ extensive internal bracing. It shall be fin-
ished in wear resistant textured black paint. Input connectors
shall be a 4-contact barrier strip and 1x Neutrik NL4 Speakon.
A total of sixteen 3/8"-16 threaded mounting/suspension
points (4 each top, bottom, sides) shall be provided. The front
of the loudspeaker shall be covered with a powder coated per-
forated steel grille.
The low frequency loudspeaker shall be the EAW model
MQ1215.
Manufacturing tolerances are +/- 0.13 and +/- 1°
PIN 1--...LF1--
-- +
-- +
LF 1 LF 2
PIN 1+...LF1+
PIN 2+...LF2+
PIN 2--...LF2--
MQ1215
WHITINSVILLE, MA USA
S/N
NEUTRIK
N E U T R I K
NL 4 MPR
NL 4 MPR
A
A
5.68
7.75
L
C
L
C
L
C
510995 (O) 5/24/01
6.37
21.00
12.70
DIMENSIONS APPLY
TO TOP AND BOTTOM
24.00
TOP
(12.75)
10.50
INPUT
FRONT
5.63
BACK
30°
17.15
10.34
GRILL PARTIALLY SHOWN
VIEW A-A
DIMENSIONS APPLY
TO BOTH SIDES
NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE)
2. SYMBOL INDICATES CENTER OF BALANCE.
3. WEIGHT APPROX: 128 LBS.
4. SHIPPING WEIGHT APPROX: 140 LBS.
13.15
7.38
10.69
36.10
40.00
19.75