Filter
Top Products
SPECIFICATIONS MK8196
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. MK8196/2 pp March 2002 Printed in USA
The two-way full range loudspeaker systems shall incorporate
an 8-in LF transducers and a 1-in exit/1.5-in voice coil com-
pression driver HF transducer.
The LF drivers shall be mounted in an optimally vented enclo-
sure tuned for maximum low frequency response. The HF driv-
er shall be loaded on a constant directivity horn with a nom-
inal coverage pattern of 90° (h) x 60° (v). The HF horn shall
feature a square flange allowing it to be rotated 90°. An
internal passive filter network shall provide fourth order
acoustical crossover and system equalization between the low
and high frequency sections.
System frequency response shall vary no more than ±3 dB
from 89 Hz to 18 kHz measured on axis. The system shall pro-
duce a Sound Pressure Level (SPL) of 95 dB SPL on axis at 1
meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 125.8 dB SPL on axis at 1 meter.
The system shall handle 300 Watts of amplifier power (AES
Standard) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed
polyurethane. Input connectors shall be two-terminal barrier
strip. A total of 13x 3/8"-16 threaded mounting/suspension
points (3 each top and bottom, 3 per side and 1 back) shall
be provided. Four additional mounting points shall be provid-
ed on the rear configured to accept an Omnimount brand
Series 100 bracket. The front of the loudspeaker shall be cov-
ered with a powder coated perforated steel grille.
The 2-way full range loudspeaker shall be the EAW model
MK8196.