EAW DSA230 & DSA250 Speaker User Manual


  Open as PDF
of 2
 
Thank you for purchasing EAW products
If you have questions about DSA Repackaging please contact the EAW Service Department by one of the methods below, or by e-mail
at service@eaw.com.
One Main Street, Whitinsville, MA 01588 tel 800 992 5013/508 234 6158 fax 508 234 8251 web www.eaw.com
EAW P/N RD0172 (A) 13SEPT04
EAW is the worldwide technological and market leader in the design and manufacture of high-performance, professional loudspeaker systems.
5. If returning the product to EAW or to an authorized EAW distributor, include
in the shipping carton:
a. If under warranty, proof of the original delivery date or a copy of the
original sales receipt.
b. A description of the suspected defect or malfunction and the conditions,
if any, which caused the problem.
c. A return address.
6. Install and secure the cover (A or C).
7. If being returned to EAW, write the RA number so it is prominently
displayed on the outside of the shipping carton. Any products received
without an assigned RA number that is clearly visible upon arrival at
EAW will be refused.
Repackaging the DSA Loudspeakers
NOTE: For clarity these instructions do not show
the poly bag (G) around the loudspeaker.
1. Place loudspeaker to be reshipped into the poly bag.
2. Insert a foam end cap (E) onto each end of the loudspeaker
B
D
FOR DSA230
FOR DSA250
C
DSA250
LOUDSPEAKER
REPACKAGING
A
DSA230
LOUDSPEAKER
REPACKAGING
3. Lay the loudspeaker/poly bag
/end caps face up into the box.
The DSA230 and the DSA250 loudspeakers differ in length. They are both
secured in the their packaging by similar parts. The longer DSA250 requires
two cardboard top pads (F) and the shorter DSA230 requires only one.
4. Insert the top pad/s (F) over the cradled loudspeaker.
1 TOP PAD REQUIRED FOR
PACKAGING THE SHORTER
DSA230 LOUDSPEAKER
F
2 TOP PADS REQUIRED
FOR PACKAGING THE
LONGER DSA250 LOUDSPEAKER
F
POLY BAG, ITEM G,
NOT SHOWN
FOR CLARITY
G
E
E
 previous