EAW DC1 Speaker User Manual


 
Frequency Response
±3 dB 56 Hz to 16 kHz
-10 dB 46 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Passive MF/HF 108
LF 2x 100
Nominal Input Impedance (ohms)
Passive MF/HF 8
LF 2x 4
• Four 15-in woofers maximize LF output
• Horn-loaded 10-in cone mid frequency section with Radial
Phase Plug™
• Horn-loaded 2-in exit/3-in voice coil HF compression driver
• Asymmetrical horn loading directs coverage down
when positioned flush to wall
• High-output system designed to deliver the extreme level
requirements of high energy dance clubs
The DC1 is engineered for use in permanent installations. The
system includes four 15-in woofers in two optimally vented
enclosures, a horn-loaded 10-in midrange and a 2-in exit/3-in
voice coil high frequency compression driver on a 90° (h) x
40° (v) dispersion constant directivity horn.
The system comprises three separate enclosures – a central
mid/high section flanked by two LF enclosures. The mid/high
horn dispersion is vertically asymmetrical (+10°,-30°). Each
pair of woofers in the LF section is mounted in a push/pull
configuration to minimize mechanical distortion.
A complex asymmetrical internal passive crossover/filter net-
work provides MF/HF subsystem integration. An MX Series
Close Coupled Processor™ should integrate the LF and MF/HF
subsystems.
The DC1 bi-amplified three-way dance club system provides
high output, high definition reinforcement for large sized
clubs. Overall design is robust to ensure reliability in the face
of continuous peak output operation.
The DC1’s asymmetrical horns direct coverage down when the
enclosures are mounted flush to a wall. The enclosure includes
balance-optimized threaded mounting points.
Like all EAW products, it can be special ordered in virtually any
color to match a specific décor. Six year warranty.
SPECIFICATIONS DC1
FEATURES
APPLICATION
PERFORMANCE
DESCRIPTION
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC1/2 pp October 2001 Printed in USA
Power Handling (watts, continuous)
Passive MF/HF 350
LF 2x 1600
Calculated Output Limit (dB SPL @ 1 m)
Passive MF/HF Peak 139
LF Peak 141
Passive MF/HF Long term 133
LF Long Term 135
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal 90
Vertical 40 (+10,-30)
Product Group Avalon
Configuration 3-way full-range
Powering Bi-amplified (passive MF/HF
crossover)
LF Subsystem 4x 15-in woofers, vented
MF Subsystem 1x 10-in woofer, horn loaded
HF Subsystem 1x 2-in exit/3-in voice coil com-
pression driver on CD horn
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors 2x Neutrik NL8 Speakon,
6x Neutrik NL4 Speakon
Suspension Hardware 35x 3/8”-16 threaded mounting
points (12 top and bottom,
4 per side, 3 back)
Grille Zinc coated perforated steel
(LF sections only)
Dimensions inches millimeters
Height 40.0 1016
Width (front) 69.7 1770
Width (rear) 44.6 1133
Depth (max) 25.7 652
PHYSICAL