Filter
Top Products
SPECIFICATIONS AS415e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS415e/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(PI ANGLE).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(NUT PLATE).
SYMBOL INDICATES CENTER OF BALANCE
FRONT
22.50
24.63
GRILLE PARTIALLY SHOWN
BACK
C
L
C
L
5.00
(1.50)
INPUT
4.00
19.50
11.00
509138 (0)
exp 5/14/01
TOP/BOTTOM
8.50
C
A
4.24
A
16.31
23.00
L
13.64
19.39
(16.50)
20°
SIDES
DIMENSIONS APPLY
TO BOTH SIDES
C
L
4.63
16.56
18.60
20°
509138 (0)
5/14/01
The low frequency loudspeaker system shall incorporate a 15-
in LF transducer that shall be mounted in a vented enclosure
tuned for optimum LF response.
System frequency response shall vary no more than ±3 dB
from 60 to 500 Hz measured on axis. The system shall pro-
duce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 130 dB SPL on axis at 1 meter.
The system shall handle 600 Watts of amplifier power (con-
tinuous) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint. Input connectors shall be 2-con-
tact terminal strip. Eighteen (18) 3/8"-16 threaded mount-
ing/suspension points (4 each top, bottom and sides, 2 on
back) shall be provided. The front of the loudspeaker shall be
covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS415e.
Manufacturing tolerances are +/- 0.13 and +/- 1°