Filter
Top Products
6.3 Partial Sound (Some Frequency Bands Missing)
1. Incorrect EQ settings in the electronic equipment. Ensure all EQ settings and filters on
the mixing console or preamplifier and on other equipment are set for normal
operation. Ensure level controls on electronic crossovers and associated amplifiers are
correctly set and that all cables and connections for such equipment are working properly.
2. Incorrect processor configuration. Make sure the processor configuration is correct for
the
loudspeaker and its intended mode of operation.
3. Incorrect mode switch setting on the loudspeaker input panel. Ensure this switch is set
for the operating mode you are using: single, bi-amplified or tri-amplified.
4. Driver(s) not working properly. Contact EAW Service for appropriate troubleshooting.
5. The crossover network inside the loudspeaker is not working properly. Contact EAW
Service for appropriate troubleshooting.
Page 7