Filter
Top Products
Specifications
www.earthquakesound.com
Specifications are Subject to Change Without Notice
6 7
SS-82W SPECIFICATIONS
Grille Frame Diameter:
Frequency Response: 30Hz - 30kHz
Sensitivity:
91dB @ 1W/1M
Nominal Impedance: 8-Ohm
Power Handling: 30 - 300 Watts
Enclosure Material / Type:
Infinite baffle, flush with wall
Drive Components:
Two-way system using:
One 3/4" silk dome
compression tweeter and
one 8" wide surround
polypropylene cone woofer
Wire Gauge Recommended: 12
Weight:
7.25 lbs.
11-3/16" • 282mm
Cut Out Hole Diameter:
9-9/16” • 244mm
Mounting Depth: 5-3/16" • 147.5mm
Finish:
White / Paintable
WARNING:
These products are capable of generating high sound pressure
levels. You should exercise caution when operating these
speakers. Long term exposures to high levels of sound pressure
will cause permanent damage to your hearing. Sound pressure
levels exceeding 85dB can be dangerous with constant
exposure, set your audio system to a comfortable loudness level.
Earthquake Sound Corporation does not assume liability for
damages resulting from the direct use of Earthquake speakers ,
and urges users to play volume at moderate levels.