Dynacord DPA 4245 Stereo Amplifier User Manual


 
BRIDGED MODE Direct Output Isolated Outputs Direct Output Isolated Outputs
Output Definition 8 200V 140V 50V 8 200V 140V 50V
Load impedance or rated output voltage
Rated Load Impedance —— 57 28 3.6 ——- 40 19.6 2.5
isolated outputs only
Rated Output Power 560 W 700 W 700 W 700W 600W 1000W 1000W 1000W
THD<0.2%, 45Hz ... 20kHz
Maximum Bridged Output Power 900W 820W 800W 780W 1200W 1180W 1160W 1140W
THD=1%, 1kHz
GENERELLPower Requirements 230V / 50Hz...60Hz
Power Consumption
at 1/8 maximum output voltage @ rated load impedance 690 W 870 W
Protections Audio limiters, High temperature, DC, HF, Back-EMF,
Peak current limiters, Inrush current limiters, Turn-on delay, Output Transformer Saturation Protection
Input Connectors Euro-style, 3pin, detachable or XLR
Output Connectors Euro-style, 12pin, detachable, covered
Cooling Front-to-Rear, 3-stage-fans
Regulations The appliances are in accordance with EN60065, EN50081-1, EN 50082-1
Safety Class I
Operating Temperature Range +5°C ... +40°C
Mounting Depht with Connectors 437 mm
Mounting Depht without Connectors 377 mm
Dimensions (W x H x D) 483mm x 132.5mm x 382mm
Weight (net) 20.5 kg 22.5kg
28