Filter
Top Products
Americas
Telex Communications Inc. 12000 Portland Ave South, Burnsville, MN 55337, USA
USA—Phone: 1-800-392-3497, Fax: 1-800-955-6831
Canada—Phone: 1-866-505-5551, Fax:1-866-336-8467
Latin America—Phone: 952-887-5532, Fax: 952-736-4212
Europe, Africa & Middle-East
EVI Audio GmbH. Hirschberger Ring 45, D 94315, Straubing, Germany
Phone: +49 9421-706 0, Fax: +49 9421-706 265
France: EVI Audio France S.A. Parc de Courcerin, Allée Lech Walesa, F 77185 Lognes,
France • Phone: +33 1-6480-0090, Fax: +33 1-6006-5103
UK: Shuttlesound Ltd., 4 The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK
Phone: +44 208 646 7114, Fax: +44 208 640 7583
Asia & Pacific Rim
Japan: EVI Audio Japan Ltd. 5-3-8 Funabashi, Setagaya-Ku, Tokyo, Japan 156-0055
Phone: +81 3-5316-5020, Fax: +81 3-5316-5031
Australia: EVI Audio (Aust) Pty Ltd. Slough Business Estate, Unit 23, Silverwater,
N.S.W. 2128, Australia • Phone: +61 2-9648-3455, Fax: +61 2-9648-5585
China: EVI Audio (HK) Ltd. 7th Floor China Minmetals Tower, No. 79 Chatham Road South,
Tsim Sha Tsui, Kowloon, HK • Phone: +852 2351-3628, Fax: +852 2351-3329
Singapore: Telex Pte. Ltd. 3015A Ubi Road 1, 05-10 Kampong Ubi Industrial Estate,
Singapore 408705 • Phone: +65 6746-8760, Fax: +65 6746-1206
„EVI Audio GmbH • Printed in Germany • subject to change without prior notice • Sept. 2003/1 • # 163070
preliminary
Amplifier at rated conditions, both channels driven, 8 ohms loads, unless otherwise specified
Technical Specifications CL 800 CL 1200 CL 1600
Load Impedance 2 ohms 4 ohms 8 ohms 2 ohms 4 ohms 8 ohms 2 ohms 4 ohms 8 ohms
Max. Midband Output Power
THD = 1%, 1kHz
600 W 400 W 240 W 900 W 600 W 350 W 1100 W 800 W 500 W
Rated Output Power
THD < 0,1%, 20Hz … 20kHz
---- 300 W 150 W ---- 500 W 250 W ---- 700 W 350 W
Max. Single Channel Output Power
Dynamic Headroom, IHF-A
1100 W 580 W 300 W 1450 W 850 W 450 W 2200 W 1200 W 625 W
Max. Single Channel Output Power
Continuous, 1kHz
800 W 480 W 270 W 1200 W 720 W 410 W 1500 W 950 W 550 W
Max. Bridged Output Power
THD = 1%, 1kHz
---- 1200 W 800 W ---- 1800 W 1200 W ---- 2200 W 1600 W
Maximum RMS Voltage Swing
THD = 1%, 1kHz
50 V 62 V 72 V
Power Bandwith, ref. 1kHz
THD =1%, half power @ 4 ohms
10Hz … 60kHz 10Hz … 60kHz 10Hz … 60kHz
Voltage Gain, ref. 1kHz 32,0 dB 32,0 dB 32,0 dB
Input Sensitivity
rated power @ 8 ohms, 1kHz
+1,15 dBu (0,88 V rms) +3,2 dBu (1,12 V rms) +4,7 dBu (1,33 V rms)
THD at rated output power
MBW = 80kHz, 1kHz
< 0,05% < 0,05% < 0,05%
IMD-SMPTE, 60Hz, 7kHz < 0,02% < 0,02% < 0,02%
DIM 30, 3,15kHz, 15kHz < 0,01% < 0,01% < 0,01%
Maximum Input Level +22 dBu (9,76 V rms) +22 dBu (9,76 V rms) +22 dBu (9,76 V rms)
Crosstalk
ref. 1kHz, at rated output power
< -80 dB < -80 dB < -80 dB
Frequency Response, ref 1kHz 15Hz … 40kHz (+/- 1dB) 15Hz … 40kHz (+/- 1dB) 15Hz … 40kHz (+/- 1dB)
Input Impedance, active balanced 20 kohms 20 kohms 20 kohms
Damping Factor, 1kHz > 300 > 300 > 300
Slew Rate 25 V/µs 25 V/µs 25 V/µs
Signal to Noise Ratio, A-weighted 103,5 dB 105,5 dB 107,0 dB
Output Noise, A-weighted < -70 dB < -70 dB < -70 dB
Output Stage Topology Class AB Class H Class H
Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption
1/8 max. output power @ 4 ohms, +10%
550 W 600 W 660 W
Protection
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters
Inrush current limiters, Turn on delay
Cooling Front-to rear, 3-stage fans
Safety Class I I I
Dimensions ( W x H x D ) mm 483 x 88,1 x 386,8 483 x 88,1 x 386,8 483 x 88,1 x 386,8
Weight 13,5 kg (30,8 lbs) 15 kg (33 lbs) 16 kg (35,2 lbs)
Optional:
Rear Rackmount 15,5" 112 930 (NRS 90262) 112 930 (NRS 90262) 112 930 (NRS 90262)
Rear Rackmount 18,0" 112 933 (NRS 90 264) 112 933 (NRS 90 264) 112 933 (NRS 90 264)