Filter
Top Products
8. Attach antenna to the Transmitter , TX.
9. Open back panel on Transmitter and insert the battery.
10. Plug a mic into the 3.5 mm port on the top of the Transmitter.
11. Turn ON the Transmitter using the top left button. The red led will
flash once and the green LED will slowly blink.
12. Move Transmitter to less than 3 feet from the Receiver.
13. When the Receiver green LED goes off and the Transmitter
LED stays on (solid green), the units are paired.
14. Try mic operation. The Transmitter volume may need to be in-
creased by using the Vol+ button on the upper right side.
General LED Indicator Guide
Transmitter ; Flashing green — Looking for a Receiver
Solid green ON — Locked to a Receiver
Flashing red ———-Battery charge low
Receiver ; Flashing green — Looking for a Transmitter
No LED on— Paired to Transmitter or off.
Flashing green means a device is searching for a pairing..
Headset MIC Connected
to the Transmitter
www.dukane.com/av
Audio Visual Products Toll-free: 888-245-1966
2900 Dukane Drive Fax: 630-584-5156
St. Charles, Illinois 60174 E-mail: avsales@dukane.com
Your projector with speakers
Your amplifier with speakers
Wireless Mic and Receiver System
Pg 2 of 2
DUKANE
WMIC1-TX
Miniature Microphone
Transmitter - side Buttons
Volume UP (+)
Volume DOWN
ON / OFF
No Function
Port 3.5 mm mini
Antenna
DUKANE
WMIC1-TX