Filter
Top Products
43
SETUP menu
Item Description
STANDBY MODE
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL
ó
SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO SOURCE (
44) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
•
When SAVING is selected, STANDBY setting of MONITOR OUT is invalid,
and no signal is output from MONITOR OUT port in the standby mode.
MONITOR OUT
While the image signal from the input port chosen in step (1) is
projected, the image signal from the input port selected in step (2) is
output to MONITOR OUT port.
(1) Choose a picture input port using ▲/▼ buttons.
Choose STANDBY to select the picture
output in the standby mode.
(2) Select the output signal from the
MONITOR OUT port using ◄/► buttons.
Select OFF to disable the MONITOR OUT
port for the input port or standby mode chosen in the step (1).
• If you have changed the setting of STANDBY, it applies only to
the current standby mode, NORMAL or SAVING, selected under
STANDBY MODE, without changing the setting of the other mode.
The factory settings are as follows:
- COMPUTER IN1 for the NORMAL mode of STANDBY MODE
- OFF for the SAVING mode of STANDBY MODE
• It is invalid if MONITOR OUT is not selected under COMPUTER IN 2.