11
XPA SERIES OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC, 20Hz~200Hz)
Power Output: 200 Watts RMS x 1 channel at 4 ohms and < 1% THD+N
Signal to noise ratio: 72dBA (reference: 1 watt into 4 ohms)
Additional power output:
300 Watts RMS x 1 channel at 2 ohms and < 1% THD+N
Dynamic power: 600 Watts at 2 ohms
Frequency response: 20Hz~200Hz (-3dB)
Maximum input signal: 6V
Minimum input signal: 200mV
Speaker output impedance: 2~8 ohms
Bass boost: 0~12dB @ 45Hz
Crossover range: 40~200Hz, 12dB/octave
Power supply: 11-16 VDC, negative ground
Fuse: 20 amp ATO x 2
Amplifier dimensions: 13.69" x 2.13" x 9.17" (WxHxD)
(348 x 54 x 233 mm)
Typical installation dimensions: 16" x 3.25" x 9.17" (WxHxD)
(406 x 83 x 233 mm)
Design and specifications subject to change without notice.
XPA6100