Dual XD5210 CD Player User Manual


 
XD5210 OPERATION
6
General Operation
Press REL and pull away from the left side to remove.
To re-install, insert right side of faceplate first then
push left side to secure.
*For semi-permanent faceplate installation, remove trim ring and install
supplied Phillips head #1 screw through left side of mounting frame into
faceplate.
Press PWR to turn the unit on. Inserting a CD will turn
the unit on automatically. Press PWR to turn the unit off.
Insert a CD or press
l
/
II
to begin or resume
playback.
Press PWR or BAND to begin or resume tuner
operation.
Press BASS to activate and deactivate bass boost
curve. Activating this feature will enhance the bass
frequencies when listening to music at low volumes.
Adjust volume using VOL or VOL (00-39).
Press DISP to display the clock. The radio frequency
(tuner mode) or CD track/elapsed time (CD player
mode) show by default.
Press DISP to display the clock, then release. Press
and hold DISP then press TUNE
<<
to adjust the hours
and TUNE
>>
to adjust the minutes. Release DISP to
save the selected time.
Faceplate Removal
Power On/Off
CD Mode
Tuner Mode
Bass Boost
Volume
Display
Set the Clock