Filter
Top Products
General Operation
5
MXD45 OPERATION
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Remove trim ring and install supplied #1 x 7/32” Phillips head
screw through left side of mounting frame into faceplate.
Press PWR or any other button (except eject) to turn the unit
on. Inserting a disc will turn the unit on automatically. Press
PWR to turn the unit off.
Insert a CD or press
l
/
II
to begin or resume playback.
Press PWR or BAND to begin or resume tuner operation.
Press BASS to activate and deactivate bass boost curve.
Activating this feature will enhance the bass frequencies
when listening to music at all volumes.
Adjust volume using
VOL t / VOL s (00-46).
Press MUTE to silence the audio. “MUTE” will appear in the
display. Press
MUTE again to cancel.
Press DISP to display the clock. The radio frequency (tuner
mode) or CD track/elapsed time (CD player mode) show by
default.
Press DISP to display the clock, then release. Press and hold
DISP for 2 seconds, the clock will begin to flash. Press TUNE
<< to adjust the hours and TUNE >> to adjust the minutes.
Clock settings will be saved after 5 seconds.
The clock will display 12-hour AM/PM time in U.S. frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
Faceplate Removal
Semi-permanent
Faceplate Installation
Power On/Off
CD Mode
Tuner Mode
Bass Boost
Volume
Mute
Display
Set the Clock
12/24-hour Clock