Filter
Top Products
Recommended minimum distance
between speakers
(6’10”)
3
LU43P-LU53P PLACEMENT
Speaker Placement
If mounting is desired, mounting both speakers on a
common solid surface facing the listening area will provide
the best audio results.
Do NOT mount speakers on wall surfaces that have hazards
concealed behind them, such as electrical wires or
plumbing. Always mount speaker on surfaces that are
sturdy enough to support the speakers’ weight, and make
sure they cannot fall or cause injury.
Your speakers can be placed in many convenient locations
in your home or patio area - as stereo pairs on either side
of your receiver - as surround speakers in home theater
surround sound systems - in your computer room to
enhance the multimedia experience - or as remote
speakers.
For wall and ceiling applications, DUAL mounting brackets
are included. In addition, the LU43 has a rear inset keyhole
for surface hanging, and the larger LU53 has two 1/4-20
brass inserts incorporated into the rear of the enclosure if
aftermarket mounting systems will be used.
You should experiment with various placements. Room
acoustics can produce large apparent differences in the
sound when small changes in the placement are employed.
For example, although the speaker may be located at any
height above the floor, directing the tweeter toward ear level
(32" – 36") or angling the entire speaker toward the listening
position often provides the most realistic imaging
experience. The amount of bass perceived increases as you
move a speaker closer to solid intersecting room surfaces
(walls, ceiling, floor).
Mounting Placement
Speaker Placement
Wall and Ceiling
Placement
Experiment for Better
Sound
®