Filter
Top Products
The First Name
In Digital Audio
4
AVR-3600
Power Amplifier Section Same quality amplifier for all 5-channel
Rated output * THD figures are power amp stage values.
Front 140 W + 140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Center 140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Surround 140 W + 140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Dynamic Power 190 W x 2 ch (8 ohms)
310 W x 2 ch (4 ohms)
390 W x 2 ch (2 ohms)
Preamplifier Section
Input sensitivity/ Impedance PHONO (MM) : 2.5 mV/ 47 kohms
CD, DVD, VDP, TV/ DBS, VCR-1, VCR-2, V.AUX,
MD/ TAPE 1, TAPE 2, 8-ch EXT. : 200 mV/ 47 kohms
Output level/Load Impedance FRONT L/R, CENTER, SURROUND L/R, EFFECT L/R,
SUB WOOFER : 1.2 V/ 10 kohms
VCR-1, VCR-2, MD/ TAPE 1, TAPE 2,
MULTI SOURCE : 150mV/ 47 kohms
Digital Input Optical VDP, VCR-1, VCR-2, V.AUX, TAPE1(Initial)
Coaxial CD, DVD, TV/ DBS (Initial)
RF VDP (Fixed)
Digital Output REC OUT : TAPE-1 (Initial)
RIAA deviation ±1 dB (20 Hz - 20 kHz)
Signal-to-noise ratio (A-weighting) 105 dB (DIRECT)
Tone control Treble : ± 10 dB at 10 kHz
Bass : ± 10 dB at 100 Hz
Video Section
Input Terminal Composite DVD, VDP, TV/ DBS, V.AUX, VCR-1, VCR-2 :
1 Vp-p / 75 ohms
S-Video DVD, VDP, TV/ DBS, V.AUX, VCR-1, VCR-2 :
1 Vp-p / 75 ohms
Component Video DVD, TV
Output Terminal Composite VCR-1, VCR-2, MONITOR-1, MONITOR-2 :
1 Vp-p / 75 ohms
S-Video VCR-1, VCR-2, MONITOR-1, MONITOR-2 : 1 Vp-p / 75 ohms
Component Video MONITOR (5 - 20 MHz, +0, -3 dB)
FM Section
Tuning frequency range 87.5 - 107.9 MHz
Usable sensitivity 1.0 µV (11.2 dBf)
S/N 50 dB sensitivity (µV at 75 ohms) Mono : 1.6 µV (15.3 dBf)
Stereo : 23 µV (38.5 dBf)
Signal-to-noise ratio (A-weighting) Mono : 80 dB, Stereo: 75 dB
Total harmonic distortion Mono : 0.15%, Stereo: 0.3%
AM Section
Tuning frequency range 520 - 1710 kHz
Usable sensitivity 18 µV
Signal-to-noise ratio 50 dB
General
Power supply, Power consumption AC 120 V, 60 Hz, 11 A
Dimensions, Weight 434 (W) x 181 (H) x 494 (D) mm, 21.5 kg, 47.4 lbs.
17.1”(W) x 7.1” (H) x 19.4” (D)
Specifications
AVR-3600dts