Diamond Audio Technology D3 1000.1 Stereo Amplifier User Manual


  Open as PDF
of 12
 
3
Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio: >95dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Distortion + Noise) <0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: >20K Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
High/Low Pass Crossover: 12dB/Oct, 30-500Hz Variable
Crossover Conguration: Switchable (OFF/HP/LP)
Bass EQ 0 to 12dB @ 50Hz (Variable)
D3 400.2
2-Channel Amplifier
400 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms) 100w x 2
(Into 2 Ohms) 200w x 2
(Bridged into 4 Ohms) 400w x 1
Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio: >90dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Distortion + Noise) <0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: >20K Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
High/Low Pass Crossover: 12dB/Oct, 40-400 Variable
Crossover Conguration: Switchable (OFF/HP/LP)
Bass EQ 0 or 12dB @ 50Hz (Selectable)
D3 500.4
4-Channel Amplifier
500 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms) 75w x 4
(Into 2 Ohms) 125w x 4
(Bridged into 4 Ohms) 250w x 2
Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio: >90dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Distortion + Noise) <0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: >20K Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
Low Pass Crossover: 12dB/Oct, 30-250Hz Variable
Crossover Conguration: Low Pass only
Bass EQ 0 to 12dB @ 50Hz (Variable)
D3 600.1
Mono Amplifier
600 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms) 250w x 1
(Into 2 Ohms) 400w x 1
(Bridged into 1 Ohms) 600w x 1
Frequency Response: 40Hz to 250Hz +/-3 dB
Signal to Noise Ratio:
>
70dBA (40 to 250Hz)
THD+N(Total Harmonic Distortion + Noise) <0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance:
>
20K Ohms
Min to Max Voltage requirements 11V to 15.5V DC
Low Pass Crossover: 12dB/Oct, 50-250Hz Variable
Crossover Conguration: Low Pass
Bass EQ 0 to 12dB
@
50Hz (Variable)
D3 1000.1
Mono Amplifier
1000 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms) 400w x 1
(Into 2 Ohms) 600w x 1
(Bridged into 1 Ohms) 1000w x 1
 previous next