Diablo Audio JP302 Stereo System User Manual


 
CAUTION: When Input 3 is set
up as a dedicated AV connec-
tion, the Diablo’s volume control
is automatically set at a fixed
level. The signal from the sur-
round processor goes to the
Diablo power amplifier section
and MUST be calibrated and
attenuated by the surround
processor.
When DEDICATE INP.3 TO AV
appears in the display, press
Menu to select the next menu-
controlled function, if you do
NOT wish to connect the left and
right front channels from a sur-
round processor to Input 3 of the
Diablo. If you do wish to make a
dedicated AV connection, press
Monitor. WARNING! NO ATTEN-
UATION will blink in the display
for 5 seconds, after which you
will be asked to confirm that you
wish to configure Input 3 as a
dedicated AV connection which
bypasses the Diablo volume
control. ARE YOU SURE? will
appear in the first line of the dis-
play. NO and YES will appear in
the second line. NO will blink.
If you do NOT wish to make a
dedicated AV connection, press
Monitor while NO is blinking,
then press Menu to select the
next menu-controlled function. If
you do wish to make this con-
nection, press Input Up so that
YES blinks in the display. Press
Monitor. Input 3 is now config-
ured as a dedicated connection
which bypasses the Diablo vol-
ume control and should ONLY
be used with a source which has
its own volume control, such as
a surround processor. NEVER
connect a normal line-level
source such as a tuner, CD play-
er, etc. directly to this input, while
it is configured in this manner.
You can always restore Input 3
to normal operation via the
Menu.
When you have configured Input
3, DEDICATE INP.3 TO AV will
appear in the display. Press
Menu to select the next menu-
controlled function.
Exiting the Menu
When CONTINUE and EXIT
appear in the display, you can
either exit the Menu or return to
the beginning of the list of menu-
controlled functions.
To go to the top of the list, press
Monitor while CONTINUE is
blinking.
To exit the Menu, press an Input
button so that EXIT blinks, then
press Monitor to return to normal
playback and to the normal dis-
play.
13