Filter
Top Products
Auto tuner presets
Getting Started
2
ENGLISH
ENGLISH
Remote control unit
ZONE select
switch
Volume control
buttons
ZONE ON/OFF
buttons
BAND button
Function
buttons
¢ZONE remote control unit (RC-1066)
Number buttons
(0 ~ 9)
Memory block
buttons (A ~ G)
SEARCH button
An F-type FM antenna cable plug can be connected directly.
Connecting the antenna terminals
Direction of broadcasting station
75 Ω/ohms
Coaxial cable
FM antenna
FM indoor antenna
(for HD Radio broadcasting, supplied)
AM loop antenna
(for HD Radio broadcasting, supplied)
AM outdoor antenna
Ground
Connections
• For details, see page 8 of the included operating instructions.
Operation
Listening to the HD Radio
TM
broadcasting
Press ENTER.
• The unit automatically begins searching for FM broadcast stations.
When the first FM broadcast station is found, that station is
stored in the auto preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the HD Radio auto preset memory
operation is completed.
HD Radio auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the HD Radio preset memory.
Use FUNCTION, press TUNER (RC-1052) or HD
RADIO
(RC-1066) to select “HD RADIO”.
1
3
Press MENU.
• “Auto Preset” is displayed.
2
• If an FM station cannot be preset automatically due to poor reception,
use the “HD Radio manual tuning” operation to tune in the station,
then preset it using the manual “HD Radio Preset memory” operation.
•To interrupt this function, press
<
ON/STANDBY
>
.
¢ Default settings
A1 ~ A8
87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /
100.1 MHz
B1 ~ B8
101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 / 90.1 MHz
C1 ~ C8
530 kHz / 600 / 930 / 1000 / 1120 / 1210 /
1400 / 1710 kHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
(Large size)
(Dipole)
• To prevent interference, install at least 1
meter away from the antenna connected to
the DRA-697CI’s other AM tuner terminal.
(White)(Black)