Filter
Top Products
ENGLISH
5
Operation
ENGLISH
Operation
Lifter lever
SPEED
SIZE
Armrest
Tone arm
Finger catch
STOP
START
Turntable
¢Opening the stylus cover
Raise the stylus cover before starting playback.
Place the record on the turntable.
For EP (“doughnut”) records, use the 45 rpm adapter.
1
Set the record’s playing speed using SPEED.
For 33 1/3 records ...........................Set to ¢ 33
For 45 records .................................Set to £ 45
2
Set the record size using SIZE.
For 30 cm records ...........................Set to ¢ 30 cm
For 17 cm records ...........................Set to £ 17 cm
3
Press START and hold it in for about 1 second.
•The turntable starts turning and playback starts automatically.
•Once the record is played, the tone arm returns to its original
position and the turntable automatically stops turning.
4
•Once you have finished playing records, lower the stylus cover to
protect the stylus tip.
•This set has an “auto return” function by which the tone arm
automatically returns to its original position once a specific point is
reached after a record finishes playing. Though there is no problem
with records of normal size, with records including grooves up to
this point, the auto return function may be activated before playback
is finished.
NOTE:
•Do not touch the tone arm or turntable or turn off the power
while a record is playing.
•The auto play system cannot be used for 25 cm records.
In this case operate manually. If the tone arm does not return to
its original position after playback stops, press STOP.
Place the record on the turntable.
For EP (“doughnut”) records, use the 45 rpm adapter.
1
Set the record’s playing speed using SPEED.
For 33 1/3 records ...........................Set to ¢ 33
For 45 records .................................Set to £ 45
2
Raise the lifter lever and holding the head shell’s
finger catch move the tone arm to the beginning of
the selection you want to play.
3
Lower the lifter lever.
•The tone arm lowers the stylus tip slowly onto the record and
playback starts.
4
NOTE:
•Be careful not to scratch the record.
Press STOP.
•Playback stops and the tone arm returns to its original position.
It is also possible to stop playback by raising the lifter lever. In
this case lift it using the head shell’s finger catch and move the
tone arm back to the arm rest.
Starting playback using the auto play function Starting playback manually
Stopping playback in the middle of a record
Playback
position
Position when not in use
Stylus cover
Cartridge