Denon AVR-484 Stereo System User Manual


 
43
ENGLISH
Press the TUNING
DD
(+) or
HH
() button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
Auto tuning
1
Set the input source to TUNER.
2
Watching the display, press the BAND button to select the
desired band (AM or FM).
3
Press the MODE button to set the auto tuning mode.
Lit
4
Press the TUNING
DD
(+) or
HH
() button.
Automatic searching begins, then stops when a station is
tuned in.
NOTE:
When in the auto tuning mode on the FM band, the STEREO
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the TUNED and
STEREO indicators turn off.
2 41
Manual tuning
1
Set the input function to TUNER.
2
Watching the display, press the BAND button to select the
desired band (AM or FM).
3
Press the MODE button to set the manual tuning mode.
Check that the displays AUTO indicator turns off.
4
NOTE:
When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the STEREO indicator turns off.
3
1
4
2
(Remote control unit)
(Main unit)
(Main unit) (Remote control unit)
(Remote control unit)(Main unit)
(Remote control unit)