Denon AVR-4806 Stereo System User Manual


  Open as PDF
of 4
 
Basic Operation
2 Channel Selection
3
Set the input source to “TUNER”.
4
Press the TUNER button on the remote control
unit to select the TUNER mode.
1
Watching the display, press the BAND button
to select the XM mode.
2
Press the TUNING
••
or
ªª
button to reach the
desired channel.
The channel changes continuously when you press
and hold the TUNING button.
When the artist name and song title are received,
they are displayed.
2 Listening to the XM Satellite Radio
• Check that the remote control is set to AMP or TUNER.
2 Category search
1
Press the CURSOR
FF
or
GG
button in the XM
mode.
• The current category name is displayed.
2
Press the CURSOR
FF
or
GG
button to select the
category, and press the
CURSOR
DD
or
HH
button
to select the channel within the selected cate-
gory.
MEMO
• “LOADING” is displayed while receiving the channel or
information.
3
XM040 DeepTrks
Artist name/Song title
Channel name
Channel number
• Information on the artist name, song title, category and sig-
nal level can be checked using the STATUS button on the
main unit.
• The XM Satellite Radio channels can be preset in the same
way as AM/FM band.
Please refer to “Preset Memory” and “Recalling preset sta-
tions” in the text of the AVR-4806’s operating instruction.
( page 66, 67)
LOADING
XM040 DeepTrks
•“UPDATING” is displayed while updating encryption code.
UPDATING
XM040 DeepTrks
• When the selected channel is not available, “XM– – –” is dis-
played.
XM---
CATEGORY SEARCH
XM040 DeepTrks
CAT: Rock
XM040 DeepTrks
Channel Category
 previous