Filter
Top Products
76
5
Select the various parameters.
NOTE:
• When “Default” is selected and the 0 cursor button is pressed, “MODE” and “TONE” are automatically reset to the default values and
“CINEMA EQ” is set to “OFF”.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)(Remote control unit)
6
Adjust the parameter settings.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)(Remote control unit)
Surround parameters w
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies. Decoding is performed
with emphasis on separation performance to achieve the same
atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional
surround formats as well, because the in-phase component is
assigned mainly to the center channel (C) and the reversed phase
component to the surround (SL, SR and SB channels).
• Music
This mode is suited mainly for playing music. The front channel (FL
and FR) signals bypass the decoder and are played directly so there
is no loss of sound quality, and the effect of the surround signals
output from the center (C) and surround (SL, SR and SB) channels
add a natural sense of expansion to the sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the center
channel in the DTS NEO:6 MUSIC mode has been added.
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 39).
(Remote control unit) (Main unit)
w Set the input mode to “AUTO” or “DTS”.
(Remote control unit) (Main unit)
2
Select the STANDARD (Dolby/DTS Surround) mode.
3
Play a program source with the , mark.
• The DTS indicator lights when playing
DTS sources.
Light
Light
5, 612 34
1
4
1
1
5, 6
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
• Press the SURROUND Back button.
Lights when the Surround Back CH is
on.
Light
(Remote control unit) (Main unit)
(Remote control unit) (Main unit)
3
1
(Remote control unit)
Light
32
2