Denon AVR-1506 Stereo System User Manual


 
ENGLISH
21
Basic Operation Basic Operation
ENGLISH
Dolby Pro Logic
II
x (Pro Logic
II
) mode
To play in the PLIIx mode, set S. BackSp at the Speaker
Configuration setting to 1sp or 2sp.
To play in the PLIIx mode, set Surround Back at the Power
Amp Assign. setting.
1
Press the STANDARD button to select the Dolby
Pro Logic
IIx mode.
The Dolby Pro Logic II indicator lights.
Lights
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
SELECT
SURROUND PARAMETER
STANDARD
ENTER
STANDARD
SURROUND
PARAMETER
CURSOR
F
CURSOR G
The mode switches as shown below each time the button
is pressed.
DTS NEO:6DOLBY PLIIx
5
Press the SURROUND PARAMETER button to
select the various parameters.
The mode switches as shown below each time the button
is pressed.
When the Cinema mode:
MODE CINEMA
CINEMA EQ
DEFAULT
SURROUND BACK
TONE DEFEAT
3
Press the SURROUND PARAMETER button to
select the surround parameter mode.
MODE MUSIC
TONE DEFEAT
DIMENSION
PANORAMA
SURROUND BACK
DEFAULT CENTER WIDTH
When the Music mode:
MODE GAME
TONE DEFEAT
DEFAULT
SURROUND BACK
When the Game mode:
4
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to select the optimum mode for
the source.
When the SURROUND BACK parameter is set to ON.
(Set S. Back at system setup to Small or Large.)
(Pro Logic IIx Cinema mode)
(Pro Logic
IIx Music mode)
(Pro Logic
IIx Game mode)
When the SURROUND BACK parameter is set to OFF.
(Set S. Back at system setup to None.)
(Pro Logic II Cinema mode)
(Pro Logic
II Music mode)
(Pro Logic
II Game mode)
(Dolby Pro Logic mode)
MODE DOLBY PL
DEFAULT
SURROUND BACK
CINEMA EQ TONE DEFEAT
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
When the Dolby Pro Logic mode:
6
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
Cinema EQ setting:
CINEMA EQ OFF
ON OFF