Filter
Top Products
9
ENGLISH
CONNECTIONS
(1) Connecting the Output Terminal
• Connect one end of the connection cord supplied with the CD Player to
the output terminals, left (L) and right (R) of the CD Player, and the other
end to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R), of
the amplifier.
(3) SYNCHRO Jack Connections
• Connect the SYNCHRO jack with a DENON cassette deck which is
equipped with a SYNCHRO jack, then make a synchronized recording. Use
the connection cord supplied with the cassette deck.
• To make use of this function, also connect the output jacks and make the
settings so that a recording can be made from the CD player to the
cassette deck.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
AC OUTLET
PHONO CD TUNER AUX
TAPE-1
/DAT
TAPE-2
/MD
TAPE-1
/DAT
TAPE-2
/MD
L
R
PB REC
SIGNAL
GND
INPUTS
L
R
RL
SPEAKER SYSTEMS
A
B
(Amplifier)
Power supply outlet
DCM-65/35
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-65
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ ON OFF
TRACK
1
5
234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 1 PLAY )
NORMAL PLAY
Follow the steps below to get an understanding of the disc play
procedure.
1. Turn the power switch on and press the open/close (
5 OPEN/CLOSE)
button to open the drawer.
2. Set the disc to be played in the front side tray.
3. Press the play button (
1).
4. The drawer closes and the disc just loaded is played.
5. The disc number, track number and elapsed time, etc., for the disc
currently playing appear on the display window.
6. If the open/close (
5 OPEN/CLOSE) button is pressed while a disc is
playing, playback continues, but the drawer opens and four discs can be
replaced. The disc that can be replaced switches when the DISC SKIP
button is pressed.
Press the open/close (
5 OPEN/CLOSE) button again to close the drawer.
(1) Starting Playback
(2) Stopping Playback
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-65
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ ON OFF
TRACK
1
5
234
678
9101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹fi
‚
1
2
3
4
5
( 2 STOP )
1. Press the stop button (2 STOP) to stop playback.
2. To replace discs, press the open/close (
5 OPEN/CLOSE) button.
The disc which was playing switches over to the front side and the drawer
opens.
OPEN/CLOSE
DISC SKIP
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
5 DISC AUTOMATIC DISC LOADING SYSTEM
DCM-65
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£¢ON OFF
TRACK
1
5
234
678
9 101112
13141516
DISC
MIN
SEC
¤
‚
⁄
‚
‹
fi
‚
1
2
3
4
5
• Set the disc you want to
played in the front side.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
(Cassette Deck)
Power supply outlet
DCM-65/35
(2) Connecting the Digital Output Jack (COAXIAL) (DCM-65 only)
• Use a 75 Ω/ohm pin cord to connect the digital output jack (COAXIAL) of
the DCM-65 to the digital input jack (COAXIAL) on a digital processor or
MD recorder, available in stores.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
CONTROL
OUT
IN
SYNCHRO
DIGITAL INPUT
COAXIAL
OPTICAL
Power supply outlet
DCM-65/35
Digital processor or MD recorder