Filter
Top Products
ENGLISH
ENGLISH
Operation Operation
9
¢Checking the programmed tracks:
Press [CALL].
The tracks are displayed in the programmed order each time the
button is pressed.
¢Clearing tracks from the program:
Press [CLEAR] while the track you want to clear is displayed during
the “Checking the programmed tracks” operation above.
¢Stopping programmed playback:
Press [DIRECT] or press 5 to open the disc tray.
•Tracks on a disc not loaded can also be programmed, but if you try
to play that disc, the microprocessor detects that it is not loaded and
the following disc is played automatically.
• When programming, do not program a track number which is not
recorded on the disc. If such a number is programmed by mistake,
the player ignore the program.
•For programmed playback, the remaining time for the program is
only displayed when the programmed tracks are all on the same
disc.
“– – : – –” is displayed when tracks on more than one disc are
programmed.
• In the case that the total playing time of programmed tracks
becomes more than 99:59, “– – : – –” is displayed.
Press [7] or press and hold
<
7/9
>
during
playback.
•“ ”is displayed if the end of the last track is reached during
manual searching. If this happens, use [6] or <8/6> to
turn the display off.
Press [6] or press and hold
<
8/6
>
during
playback.
•“ ” is displayed if the beginning of the first track is reached
during manual searching. If this happens, use [7] or
<7/9> to turn the display off.
NOTE:
• The sound may be interrupted momentarily when resuming
normal playback from the manual search mode. This is not a
malfunction.
Programmed play
You can play certain tracks on the loaded discs in any order.
Up to 32 tracks can be set in a program.
Use this function to skip forward or backward while listening to the
sound.
Press [PROGRAM].
•The “PROGRAM” indicator lights.
1
Press [DISC SELECT], [NUMBER] to select the disc to
be programmed.
Example: To program the 3rd track on the 2nd disc and the 12 track
on the 5th disc:
Press [PROGRAM] [DISC SELECT] [2] [3], [DISC SELECT] [5]
[+10] [2].
2
Press 1.
•The tracks are played in the programmed order.
3
Manual search
¢Searching forward:
¢Searching backward:
Press [8] or
<
8/6
>
during playback.
• The pickup will advance to the beginning of the next track and
playback will continue. Pressing the button several times will
forward the pickup the corresponding number tracks.
¢Moving back to the beginning of the current track
(file):
Press RANDOM.
• The “RANDOM” indicator lights.
Press 1.
•A track is selected automatically and playback starts.
During programmed playback:
The programmed tracks are played in random order.
During repeat playback:
The tracks are played once in random order, then played again in
a different order, and this is repeated.
1
2
¢Stopping random playback:
Press RANDOM or [DIRECT].
Use this function to play all the tracks on the all discs or a disc once
in random order.
NOTE:
• During random play, the player may display the number of disc
which is not loaded in the tray. In such a case, the player will read
the disc information, then reset automatically to correct. This is
not a malfunction.
¢Disc sequential random play:
Press RANDOM and specify the disc numbers (1 to 5)
with the [DISC SELECT] and the [NUMBER].
Press 1.
•A track is selected automatically and playback starts.
1
2
Random play
¢Full random play: