Filter
Top Products
Advanced Operation Advanced Operation
ENGLISH
ENGLISH
41
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Press [MODE] for at least 2 seconds to switch from the
Browse mode to the Remote mode.
• “Remote iPod” is displayed on the AVR-587’s display.
Watching the iPod’s screen, press [
DD HH
] to select
“Photos” or “Video”, then press [ENTER] or [
GG
].
• The iPod’s photo and video data are displayed on the monitor.
Use this procedure to view photo and video data stored on the iPod
on a monitor.
1
2
•To output photo or video data recorded on the iPod to the monitor,
the iPod’s “TV Out” setting (under “Video Settings”) must be set to
“ON”.
For details, refer to the iPod’s operating instructions.
Disconnecting the iPod
Press
<
ON/STANDBY
>
or [OFF] and set the AVR-587’s
power to the standby mode.
The iPod can be disconnected after switching to a function other
than the one to which the iPod input is assigned.
[ENTER]
[D H F G]
[MODE SELECTOR 2]
[MODE SELECTOR 1]
INPUT SELECTOR
[OFF]
[VOLUME]
[D H F G]
[ENTER]
[MODE]
[ZONE2 OFF]
[ZONE2 ON]
INPUT SELECTOR
[MAIN]
<ON/STANDBY> ZONE2
INPUT SELECTOR