Filter
Top Products
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
neural
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 38).
Surround Playback of 2-channel Sources
DOLBY PLgx
or DOLBY PLg
: The signals are decoded in DOLBY PLgx or
DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, “DOLBY
PL” is displayed.
Standard Playback
This is the standard mode for enjoying surround sound according
to the program source.
Surround Modes
To select these surround modes using the SELECT/ENTER knob on the
main unit or press the STD button on the main remote control unit. The
mode switches each time the button is pressed.
n When using a surround back speaker
[Selectable items]
DOLBY PLgx
DTS NEO:6
neural
n When not using a surround back speaker
[Selectable items]
DOLBY PLg
DTS NEO:6
neural
[Selectable items]
ON
: Use room EQ.
OFF
: Do not use room EQ.
A4 Direct Mode Setup
Select room EQ use for DIRECT mode.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
14 Direct OFF
A5 Remote ID Setup
Set remote control ID.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
15 Remote ID 1
[Selectable items]
1
2
3
4
NOTE
When using the AVR-1708 with only the included remote control unit
(RC-1075), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
[Selectable items]
All
: Apply settings to all surround modes.
Assign
: Make settings for each surround mode separately.
A3 Room EQ Setup
Select room EQ setting method.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
13 EQ All
A2 Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
12AutoSurr. ON
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the three types of input signals
listed below.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel
format (DOLBY PLgx Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multichannel
format (DOLBY/DTS SURROUND)
b Default settings are indicated in ( ).
Operations (vpage 22)