Filter
Top Products
7
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Preparation PlaybackSetup Wizard
7
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Playback (Basic operation)
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
(BD, SAT/CBL, TV, USB/iPod, DVD,
V.AUX, DOCK, TUNER, GAME) to be
played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
nUsing the button on the main unit
Press SOURCE d or SOURCE f.
•Every time you press SOURCE d or SOURCE f, the input source
switches in the following order.
BD DVDTUNER
DOCKUSB/iPod
TV
V.AUX
SAT/CBL
GAME
•When iPod 1 on the main unit is pressed, the input source
of this unit is switched to “DOCK” or “USB/iPod” and the
connected iPod is automatically played (vm page 24 “iPod
play function”).
nUsing the “Source Select” menu
Player
BD
DVD
DOCK
USB/iPod
Video
SAT/CBL
TV
GAME
V.AUX
Tuner
TUNER
[ENTER] Enter[ ] Move
Source Select
The currently selected input
source is highlighted.
q Press SOURCE SELECT.
Display the “Source Select” menu.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
•When using with an iPod connected directly to the USB port of this
unit, select “USB/iPod” for the input source.
•Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vm page 63).
•To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
•When SOURCE SELECT is pressed, the AMP-operation mode starts
automatically (vm page 71).
Selecting the input source