Filter
Top Products
Basic Operation Basic Operation
8
Network-related settings (Network Setup)
If you are using a broadband router (DHCP function), there is no need to make the settings at “System Setup Menu” -
*
“7.Option
Setup” - “7.Network Setup”, since the DHCP function is set to “ON” in the AVC-A11XV/A1XV’s default settings.
If the AVC-A11XV/A1XV is being used connected to a network without the DHCP function, the network settings must be made. In
this case, some knowledge of networks is required.
*
AVC-A1XV only
Setting the IP Address
Setting the Proxy
Make this setting when connecting to the Internet via a proxy
server.
3.Subnet Mask
When connecting an xDSL modem or terminal adapter
directly to the AVC-A11XV/A1XV, input the subnet mask
indicated in the documentation supplied by your provider.
Normally input 255.255.255.0.
4.Gateway
Set the IP address within the ranges shown below.
When connected to a gateway (router), input its IP address.
1.Proxy:
In some cases it is necessary to pass through a proxy server
to connect to the Internet.
2 DHCP (Dynamic Host Configuration Protocol)
and Auto IP
These are systems by which the IP address and other
network settings are automatically set for the AVC-
A11XV/A1XV, computer, broadband router and network
devices.
2 DNS (Domain Name System)
This is a system for converting the domain names used when
browsing Internet sites (for example, “www.jp”) into the IP
addresses actually used for communications (for example,
“202.221.192.106”).
2.IP Address
Set the IP address within the ranges shown below. The Net
Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
1.DHCP Settings
Set whether or not to make the DHCP settings automatically.
ON (default settings):
The DHCP function is enabled.
OFF:
The DHCP function is disabled.
ON:
The proxy server is enabled.
OFF (default settings):
The proxy server is disabled.
2.Proxy Address/Name
Input the proxy server domain name or address. If “ON” has
been set at the “Proxy” setting, the character input mode is
set when this item is selected and the CURSOR
GG
button is
pressed. Use the CURSOR
DD
,
HH
,
FF
and
GG
buttons to choose
the character, then press the ENTER button. Once all the
characters have been input, the character input mode is
canceled.
3.Port
Input the proxy server port number. If “ON” has been set at
the “Proxy” setting, the number input mode is set when this
item is selected and the CURSOR
GG
button is pressed. Use the
CURSOR
DD
,
HH
,
FF
and
GG
buttons to choose the number, then
press the ENTER button. Once all the numbers have been
input, the number input mode is canceled.
• Once the settings are completed, press the ENTER button three
times to quit the “System Setup Menu”.
Standby Mode Power Saving
When not using the AVC-A11XV/A1XV connected in a network,
set “ON” to reduce the power consumption when in the standby
mode.
Set “OFF” when using the AVC-A11XV/A1XV connected in a
network.
PC Language
Select according to the language of the computer being used.
The languages are indicated with three letters conforming to
ISO639-2.
5.Primary DNS / Secondary DNS
Set the IP address within the ranges shown below.
If there is only one DNS address indicated in the
documentation supplied by your provider, input it at “e. 1st”.
If there are two or more DNS addresses, input the first one at
“f. 2nd”.