Filter
Top Products
Operation Operation
ENGLISH
14
ENGLISH
Use
<
INPUT SELECTOR
>
to select “TUNER” or press
[TUNER].
Auto tuning
Manual tuning
Press MODE to set the auto tuning mode.
• The “AUTO” indicator lights.
Press TUNING.
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Use
<
INPUT SELECTOR
>
to select “TUNER” or press
[TUNER].
Press MODE to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
Press BAND to select “AM” or “FM”.
When listening to the XM Satellite Radio ( page 15).
Press BAND to select “AM” or “FM”.
When listening to the XM Satellite Radio ( page 15).
Press TUNING.
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
Press MEMORY.
Press
<
PRESET
>
or [CHANNEL] to select the desired
preset channel (1 to 8).
Preset memory
Press [MEMORY BLOCK] (A to G)orSHIFT to select
the desired memory block (A to G).
Press MEMORY again.
• Store the station in the preset memory.
1
2
3
4
5
•To preset other channels, repeat steps 2 to 4.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
Recalling preset stations
Press [MEMORY BLOCK] (A to G)orSHIFT to select
the memory block.
Press
<
PRESET
>
or [CHANNEL] to select the desired
preset channel.
1
2
Listening to the radio
Hold
<
PRESET •
>
and press
<
ON/STANDBY
>
.
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is
completed.
Auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
• If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation to tune in the station,
then preset it using the manual “Preset memory” operation.
•To interrupt this function, press
<
ON/STANDBY
>
.
¢Default settings
Auto tuner presets
A1 ~ A8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
Press
<
ON/STANDBY
>
and set the DRA-297’s power
to the standby mode.
1
2
Check that the remote control unit is set to “A”.