Filter
Top Products
section three 8
Adjusting the Transmitter Output Power
Your Delphi XM Satellite Radio Signal Repeater has four power output
levels. These can be adjusted with the PWR OUT level switch located at
the back of the transmitter. In situations where a lower output level may
be desired (e.g., near other wireless devices or if someone else is using
another transmitter), simply lower the output level by sliding the switch to
the left. (See figure 5.)
Note: Operating at a lower output level decreases the range of your Delphi XM Satellite
Radio Signal Repeater.
Figure 5.
PWR OUT
level switch
Max.
Min.