Filter
Top Products
Planning for Installation
Please allow a minimum of two inches of clearance in all directions
behind the wallboard for your speakers. Lateral clearance should not
be an issue as all models of Ultimate In-Wall Loudspeakers are narrow
enough to fit between wall studs.
Required Tools for Installation
• Saber or keyhole saw or utility knife capable of cutting drywall
• Medium Phillips screwdriver
• Level (optional)
Installation Procedure
Safety Notes:
• In general, installation by a professional installer is
highly recommended.
• Before starting construction or modification of your walls or
ceilings, you should familiarize yourself with any applicable
requirements of the local fire and building codes.
• Speaker wire must be run inside the wall as part of the
installation of in-wall loudspeakers. Plan the connection route
before you start the installation.
• Before opening up the installation cavity, check to ensure that
the area behind does not contain wiring, plumbing, ductwork, etc.
It is our pleasure to offer assistance if you have any further
questions or comments. Please feel free to contact our technical
support staff at Definitive Technology, LLP, 11433 Cronridge Dr.,
Owings Mills, MD 21117, or (410) 363-7148.
Technical Assistance
4
Visit us at www.definitivetech.com