Filter
Top Products
If you experience any difficulties with your Ultimate In-Wall
Loudspeakers, try the suggestions described below. If you are
still having problems, please consult your Definitive Technology
authorized dealer for assistance.
• Make sure all your system interconnections and power cords
are solidly in their place.
• Check to be sure that the power cords and/or speaker wires have
not been damaged.
• Many amplifier/receivers have sophisticated internal protection
circuitry. If for some reason the protection circuitry is tripped,
please turn down the system’s volume and wait five minutes
before trying the system again.
Troubleshooting Your In-Wall Loudspeakers
6
Step by Step Installation (continued)
• To install speaker, first rotate screws one-half turn counter clock-
wise to swing the dogs into position and clear the edge of the wall
cutout. Then place speaker frame in position in the cutout and
rotate screws clockwise one-half turn to grip the wall. Tighten by
hand until frame is stable but loose enough to be adjusted in final
position. Level the speaker frame and snug screws into place taking
care not to overtighten.
• Fit grill on frame.
It is our pleasure to offer assistance if you have any further
questions or comments. Please feel free to contact our technical
support staff at Definitive Technology, LLP, 11433 Cronridge Dr.,
Suite K, Owings Mills, MD 21117 or call (410) 363-7148.
Technical Assistance
Visit us at www.definitivetech.com