Filter
Top Products
Using Your C/L/R 3000(s) in a Dolby Digital AC-3 System
Using your C/L/R 3000 as a Center Channel in a Dolby
Digital System
When using your C/L/R 3000 as a center channel in a Dolby Digital system
simply hook up the C/L/R 3000 to the center channel output of your system as
described in the preceding section. Do not hook up a subwoofer/LFE output to
the low-level input on your C/L/R 3000. The subwoofer in the C/L/R 3000 is
not, in most cases, designed to be the main dedicated LFE .1 main subwoofer
in a Dolby Digital system. It is designed to extend the frequency response and
dynamic range of the center channel speaker. Set the center channel bass man-
agement to “Large” center channel
.
Using Using your C/L/R 3000 as Left and Right Main
Speakers in a Dolby Digital System
If you are using C/L/R 3000 also as the main left and right speakers in a
Dolby Digital system, set the bass management system for “Large” left and
right main speaker and “No” subwoofer
.
This will send the .1 discrete bass
subwoofer signal into the left and right main channels and into the sub
-
woofers in your left and right channel C/L/R 3000s.
10