Filter
Top Products
LOUDSPEAKER PLACEMENT
DCM In-Ceiling Loudspeakers are designed to work within any interior decorat-
ing scheme. They can be installed in virtually any location where flush mounting
is possible. To maximize their sound performance however certain guidelines
should be followed. For the best stereo reproduction the two loudspeakers
should be placed an equal distance from your listening position and separated so
that the angle between them, at the listening position, is between 40 and 60
degrees.
TWEETER LEVEL ADJUSTMENT
The output of the tweeter can be adjusted to compensate for speaker place-
ment/listening positions that are less than ideal. The 0dB position is designed to
provide the smoothest frequency response on axis. If the high frequency
response is considered to be too strong or too weak, the tweeter level can be
increased (+3dB position) or decreased (-3dB position) to suit the listeners pref-
erence.
W625
6-1/2” Two-Way InWall Speaker
25mm Soft Dome Swivel Tweeter
Impedance: 8 ohms
Sensitivity:85dB
55 Watts RMS/110 Watts Total
Frequency Response: 48Hz-20kHz
12”H x 8-5/8”W x 3-1/4”D
DCM6
6-1/2” Two-Way Home Loudspeaker
Impedance: 8 ohms nominal
Sensitivity: 89dB
75 Watts RMS/150 Watts Total
Frequency Response: 58Hz-20kHz
12.992”H x 7.992”W x 7.795”D
DCM10
10” Two-Way Home Loudspeaker
Impedance: 8 ohms nominal
Sensitivity:94dB
200 Watts RMS/400 Watts Total
Frequency Response:35Hz-20kHz
31.312”H x 15.825”W x 12.501”D
W825
8” Two-Way InWall Speaker
25mm Soft Dome Swivel Tweeter
Impedance: 8 ohms
Sensitivity: 86dB
60 Watts RMS/120 Watts Total
Frequency Response: 36Hz-20kHz
14”H x 10”W x 3-1/2”D
DCM6C
6-1/2” Center Channel Loudspeaker
Impedance: 8 ohms nominal
Sensitivity:89dB
75 Watts RMS/150 Watts Total
Frequency Response: 58Hz-20kHz
7.992”H x 19.685”W x 7.204”D
DCM12
12” Two-Way Home Loudspeaker
Impedance:8 ohms nominal
Sensitivity:97dB
250 Watts RMS/500 Watts Total
Frequency Response:30Hz-20kHz
33.312”H x 17.638”W x 15.938”D
OTHER PRODUCTS FROM DCM
InWall Loudspeakers
Home Loudspeakers