Filter
Top Products
1/4” Balanced TRS Input Connector
The 1/4” input connector of the Mini-Pre is unbalanced TS. The 1/4” input is ideal
for running instrument cables directly into the Mini-Pre.
Input Gain Control +24 to +60dB
Use the Input gain control to set the overall amount of input gain being fed into
the Min-Pre. Turning the Gain control clock wise will increase the gain from +24
to +60dB. Stages include: +24 to 60dB and +6 to +40dB (+20dB pad).
Peak LED
The red Peak LED is used to indicate that the input signal is severely clipping. It
is recommended that the Input Gain control be set so that the Peak LED occa-
sionally lights.
Power LED
The green Power LED indicates that power has been supplied to the Mini-Pre, and
the unit is currently in operation mode.
Front Panel Descriptions (from left to right)
8
Connections\Operation
Mini-Pre
®
Mini-Pre User Manual
mini comp manual 8/16/01 1:48 PM Page 8