Filter
Top Products
5
Hybrid tweeter module | 2 x 6.5” woofers | Bi-wiring binding posts |
36-34,000 Hz | H1030 x W200 x D390 mm | 22.2 kg | H40.6 x W7.7 x
D15.4” | 48.9 lb
MENTOR 6 is a medium-sized floorstanding loudspeaker
cloaked in an attractive real wood veneer and fully loaded
with such DALI innovations as paper/wood fiber cones and
the hybrid tweeter module, an instant classic in contemporary
loudspeaker design, suitable for all present and future high
resolution audio formats.
With no filter in the signal path to attenuate the dome tweeter
at the top end, it rolls off naturally at the same rate as the
ribbon begins to make its contribution heard. The combination
yields extraordinary clarity and high frequency extension for
an airy, open high end of considerable refinement.
The all-new bass/midrange units incorporate extremely rigid
aluminum chassis and an aerodynamic form for free air flow
at the rear of the cone. Large magnets and very lightweight
cones of paper/wood fiber provide all the speed and dynamics
one could desire.
The wood fibers contribute to the outstanding
stiffness of the cones.
The result is very impressive with precise, controlled bass
reproduction for enhanced physical impact and a more
involving listening experience.
Like all MENTOR models, MENTOR 6 features a luxurious matt
lacquer, real wood veneer finish and curved front and rear
panels. The integral lacquered black base includes threaded
inserts for spikes or other vibration control devices.
MENTOR [6]
Vice Grip Bi-amping/wiring Binding Posts
|
All MENTOR speakers
(except for MENTOR 1, LCR (single wiring) and SUB) are fitted with
high quality gold-plated binding posts that accept banana plugs,
spade connectors and bare cable ends. All crossovers are mounted
directly to the binding posts for the shortest possible signal path.
Non-Resonant Cabinets
|
The MENTOR MDF (Medium Density
Fiberboard) enclosures effectively suppress vibration and resonance.
The curvature of the front and rear panels lend the cabinet added
rigidity. The front baffles are attached to the main body with a special
vibration-damping adhesive that significantly reduces the transfer of
energy to the cabinet.