Filter
Top Products
Speaker Setup
If headphones are connected, remove the headphones.
SubWoofer
(Subwoofer)
4. To stop the test tone.
Press SETUP button to exit TEST TONE.
3. Press CH.LEVEL repeatedly to select
the speaker, then press
to raise or
lower the volume level until you have an
equal volume balance with the other
speakers at your listening position.
The volume level can be adjusted between
-15 and +15dB.
Adjusting Each Speaker's Relative
Volume Balance – Test Tone
1. Press button to select the “TEST
TONE” while the “SPEAKER SETUP”
menu is displayed on the TV screen,
then press
button to move.
2. Press
button to select the “ON”,
then press ENTER to confirm.
SPEAKER SETUP
DIGITAL OUT
FRONT POS.
CENTER POS.
REAR POS.
TEST TONE ON
OFF
MAIN PAGE
Each speaker emits the test tone (pink
noise) in the following order:
SPEAKER SETUP
DIGITAL OUT
FRONT POS.
CENTER POS.
REAR POS.
TEST TONE ON
OFF
MAIN PAGE
Before operating your machine, you need to set up the speaker configuration and the delay time from the listening position to
each speaker.
Speaker Setup
1. Press SETUP button while the disc is
stopped.
The setup main menu appears on the display.
SETUP
SET UP
TV DISPLAY NORMAL/PS
TV TYPE NORMAL/LB
OSD LANG WIDE
DYNAMIC
SPEAKER SETUP
VIDEO OUTPUT
AUDIO
SUBTITLE
2. Press button to select the
“SPEAKER SETUP”, then press ENTER
to move the speaker setup menu.
The speaker setting menu appears on the
display.
SET UP
TV DISPLAY
TV TYPE
OSD LANG
DYNAMIC
SPEAKER SETUP
VIDEO OUTPUT
AUDIO
SUBTITLE
Turning on/off the digital output Adjusting Each Speaker's Position
1. Press button to select the “FRONT
POS.” while the “SPEAKER SETUP”
menu is displayed on the TV screen,
then press
to confirm.
The front speaker position value appears
on the display.
SPEAKER SETUP
DIGITAL OUT
FRONT POS. 5 FT / 1.5 M
CENTER POS.
REAR POS.
TEST TONE
MAIN PAGE
2. Press button to select the
speaker’s distance, then press ENTER
to confirm.
The speaker’s distance can be adjusted
between 5 FT / 2.5m and 30 FT / 9.2 m.
SPEAKER SETUP
DIGITAL OUT
FRONT POS. 8 FT / 2.5 M
CENTER POS.
REAR POS.
TEST TONE
MAIN PAGE
3. Repeat step 1~2 to adjust other
speaker’s position.
4. To stop the SPEAKER SETUP
Press
button to select “MAIN PAGE”,
then press ENTER button.
5. To exit the SETUP.
Press SETUP button.
If each speaker’s position is disabled on the TV screen, select
DIGITAL OUT OFF.
3. Press button to select the
“DIGITAL OUT”, then press
to confirm.
SPEAKER SETUP
DIGITAL OUT OFF
FRONT POS.
ON
CENTER POS.
REAR POS.
TEST TONE
MAIN PAGE
4. Press button to select the “ON” or
“OFF”, then press ENTER to confirm.
SPEAKER SETUP
DIGITAL OUT OFF
FRONT POS.
ON
CENTER POS.
REAR POS.
TEST TONE
MAIN PAGE
5. To exit the DIGITAL OUT on/off.
Press
button.
4. To stop the SPEAKER SETUP
Press
button to select “MAIN PAGE”,
then press ENTER button.
6. To exit the SETUP.
Press SETUP button.
18 19
SETUP
SETUP