Filter
Top Products
47
Recording
Set proper ÒRECORDING SPEEDÓ.
Select one of SP/SLP with [†] or […] button.
For more information on recording speed, see
ÒUsing video cassetteÓ in the page 48.
6
6
Press [SETUP] button to complete the
setting.
ÒProgram # has been saved. For program
recording, insert a cassette....Ó message is
displayed.
On the reserved time, TIMER RECORDINGS starts
to operate.
Stopping a Timer Recording
To stop or cancel a timer recording in progress (even
an One Touch Recording) : Press and hold the button
for several seconds until STOP appears in the on-
screen display.
7
7
To Confirm or Cancel TIMER RECORDINGS
Select ÒReview/Cancel ProgramsÓ.
1
1
Confirm reservation-recording details in turn
with [†] or […] button and then, press [CLEAR]
button on the position of the details to delete.
2
2
PROGRAM1 (ONE TIME)
Channel 104 Cable
Start Date 06 / 04
Start Time 10 : 10 AM
End Time 11 : 10 AM
Tape Speed SP
PROGRAM1 (ONE TIME)
Channel 104 Cable
Start Date 06 / 04
Start Time 10 : 10 AM
End Time 11 : 10 AM
Tape Speed SP
PROGRAM 1 (ONE TIME)
Channel 104 Cable
Start Date 06 / 04
Start Time 10 : 10 AM
End Time 11 : 10 AM
Tape Speed SP
PROGRAM 1 has been saved.
For program recording,
insert a cassette.
End:
SETUP
TIMER RECORDINGS
Make a New Program
Review/Cancel Programs
Move: Input:
Video: End:
SETUPINPUT
Move: Input:
Video: End:
SETUPINPUT
Move: Select:
End:
SETUP
ENTER
Cancel: Move:
End:
SETUP
CLEAR
For correct
operation of
TIMER RECORDING,
the unit should be
turned off or turned
on DVD mode.
Timer Recordings
Timer Program Setting
Press [PROGRAM] button in VCR mode.
You can set the Timer Program.
Before timer program setting, clock should be set correctly and video mode should be
selected.
DR-C91/92D1N-BS 04.1.19 9:51 PM ˘`47