Filter
Top Products
26
Hi-Fi Stereo Playback (Hi-Fi Model only)
Playing a tape in Hi-Fi high-quality
¥ Press the [AUDIO] button repeatedly to select among playback qualities.
¥ ÒHi-FiÓ signal lights up at the top of a screen.
¥ If the Hi-Fi sound on the tape is not stable (background noise), select LINEAR to reduce them.
Forced Mono
Recording Stereo or Secondary Audio Programs (SAP)
Hi-Fi
LINEAR
MIX
¥ Programs are broadcasted in mono or stereo sound, or with a SAP.
¥ Press [AUDIO] repeatedly to select among STEREO, MONO and SAP.
¥ In some cases, the receiving conditions may be poor when receiving stereo or SAP (Secondary Audio
Programs) broadcasting. This may causes frequent interference or the volume may become uncontrollable.
¥ Press [AUDIO] in stereo or SAP mode to select mono sound.
To return to stereo sound, either press the [AUDIO] button again or reselect the channel.
STEREO
MONO
SAP
¥ When recording a stereo signal, the recording is in Hi-Fi mode.
¥ SAP is only available for areas with such station services.
¥ The following guidelines will help you decide on the best method for recording programs. Choose:
- Select Stereo reception for normal recordings and for recording stereo broadcasting television.
- Select Mono reception if the stereo signal is weak or when there is interference.
- Select SAP reception to record a second audio program. An example of a SAP is a program that is broadcasted in
English, but has a Spanish SAP.
¥ You can only record stereo and SAPs if the program is broadcasted in stereo or has SAP. Consult a television guide
for program broadcasting information.
DR-C91/92D1N-BS 04.1.19 9:51 PM ˘`26