Filter
Top Products
EnglishEnglish
56
AM/FM TUNER
OPERATION
• Press the STANDBY Button to ON . The Standby indicator will go off.
• Set the Function Selector to the TUNER position.
• Select the desired frequency band with the Radio Band Selector .
• Tune to the desired radio station by turning the Tuning control .
• Press the STANDBY Button to OFF.
ANTENNA
• For FM reception there is a built-in FM antenna wire at the rear of the unit. Move the wire
around to obtain the best reception.
• For AM reception the signals are picked up through a built-in ferrite antenna. Your may
have to orient the unit to obtain the best reception.
FM & FM-STEREO RECEPTION
• Stereo reception is possible when the tuned FM station is broadcasting in stereo.
• When the FM Stereo button is “up” and the station is broadcasting in Stereo, the
STEREO indicator lights up.
• When FM stations are weak and are disturbed, listening can be improved by pressing
down the FM STEREO selector . Reception will then be in MONO.
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
• Press the STANDBY Button to ON . The Standby indicator will go off.
• Set the Function Selector to the TAPE position.
• Press the Stop / Eject Key to open the Cassette Door of Compartment B.
• Slip your cassette tape into the door, with the exposed section uppermost and the
playback side facing you.
• Close the Cassette Door securely.
• When finished, press the Stop / Eject Key to open the Cassette Door, and retrieve your
cassette tape.
PLAYBACK
• Set the Function Selector to the TAPE position.
• Insert your cassette tape in the Compartment B.
• Press the Play Key to activate playback.
• Use the Pause Key whenever you want to suspend playback.
• Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.
CONTINUOUS PLAYBACK ( ONLY RUNNING FROM TAPE DECK B TO A )
• Set the Function Selector to the TAPE position.
• Insert your cassette tapes.
• Press the PLAY Key of deck B.
• Press the PAUSE Key and the PLAY Key of deck A.
• Deck B will now proceed to play its side.
• Adjust the VOLUME control to the preferred level.
• When Tape Deck B has finished playing, it will stop. Tape Deck A then starts playing
back automatically.
• When Tape A reaches its end, it automatically stops.
RECORDING (ONLY ON TAPE DECK A)
• This unit has Automatic Level Control circuitry. This means that the recording level is
set automatically. The volume or tone controls will not affect the recording.
• Record Key will not be pressed down when the record prevention tab is broken or
removed from the tape.
RECORDING FROM THE RADIO
• Set the Function Selector to the TUNER position.
• Tune in your station using the TUNING Control and put in your blank cassette tape in
cassette compartment “A”.
• Press the Record Key and the Play Key at the same time on Tape Deck A to start
recording.
• Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.
RECORDING FROM THE CD
• Set the Function Selector to the CD position.
• Put in your blank cassette tape in cassette compartment “A” .
• Select the CD (1,2 or 3) you want to play/record with the Disc Selector button .
Press the Record Key and the Play Key at the same time on Tape Deck A to start
recording. Press Play/Pause Key on the CD player.
• Press the Stop / Eject Key when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.