Curtis rcd822 Stereo System User Manual


 
Troubleshooting guide
Problem
Cause
Solution
In case of trouble with the unit , please look through this chart and see if you can solve the problem by yourself before calling
your dealer .
No sound from tape
The sound is distorted or faint
No sound
The tape heads are dirty
The tape heads are dirty
The CD player is paused
No sound comes out of the speakers The volume is turned down (to MIN)
The input selector does not match the
playback source
Adjust the volume
Re-select the input source
The sound is noisy The unit is too close to a TV set or
another similar appliance
Turn off the TV or other appliance ,and
relocate the unit
The cassette can not be inserted
The cassette tape is not inserted
properly or be inserted reversely .
Insert the cassette tape correctly
Clean the tape heads
Clean the tape heads
Can not listen to any station , or signal
appears weak
The station is not tuned in properly
A TV set is being used nearby
Tune in the station correctly
Turn off the TV set
The sound is distorted
The antenna is not oriented properly
Re-orient the antenna until reception
improves
Play stop immediately after starting to
pl y the CD , or play pauses or stops
during play
a
The CD is inserted upside down
The CD is dusty or dirty , or there is
condensation on the CD
Insert the CD with the printed side
upper most
Clean and dry the CD
Press the PLAY / PAUSE button
Specific CD is noisy , or playback stops
or skips
The CD is scratched , damaged or
warped
The disc is very dirty
The CD should be changed
Clean the CD
Power does not come on when the
power switch is pressed
Unit is unplugged
Connect the unit to the AC power
supply
CD Player Tuner unit Tape deck The whole unit
12