Curtis RCD-718 Stereo System User Manual


 
TO CLEAR THE PROGRAM MEMORY
1.If the disc is playing, press the STOP Button. The MEMORY will disappears.
The program memory will also be cleared if the disc compartment is opened, if the function is c-
hanged, or if the power is switched off.
SLEEP FUNCTION
When the disc is playing, press SLEEP button on the remote control. SLEEP will blink and 90 in
dicators will appear. Press SLEEP button to select the time you want (max 90, min 10). Then the
unit will resume playing mode, but SLEEP will display on the screen. And the unit will change to
standby mode at the preset time. For example, you select 10 by SLEEP button; the unit will cha-
nge to standby mode after 10 minutes.
MUTE
Press the MUTE button on the remote control to switch off the sound The MUTE indicator lights
up.
Press MUTE again to restore the sound to the previous level. Mute indicator will go off.
COLOUR
Press COLOUR button,seven colour(green white yellow cyan red purple blue) will cycle slowly
on the display.You can fix a colour that you like by press COLOURbutton once.If need to change
another colour, you need to press COLOUR button again. The colour cycle anew.
LISTENING TO PROGRAMMED TRACKS
1. Enter all tracks you want to program into memory following the procedure above.
2. Press the PLAY/PAUSE Button.
3.Disc play will start at the beginning of the first programmed track.
Continue entering tracks in this way until all the desired tracks are stored (up to 20).
Notes: If the PLAY/PAUSE Button is pressed before the PROGRAM Button is pressed to store
a track, the track will not be programmed, and the disc will start playing from the first selected
track.
Any track can be programmed to play more than once.
Repeatedly pressing the PROGRAM button will enable you to check the program if required
This function can be used at either CD mode/Tuner mode. Press TIMER once and then press
PROG./MEMORY button on the remote control about 3 seconds. The hour will flash. Press TRA-
CK/TUNE button preset your desired hours. Press MEMORY/CLOCK button to confirm.Then the
minutes will flash. Press TRACK/TUNE button preset your desired minutes. Press MEMORY/C-
LOCK button to confirm. The unit will start at your desired time
.
TIMER ON FUNCTION
PRESET EQUALIZER
This unit is equipped with a preset equalizer which has been added to enhance your listening
pleasure by altering the frequency response of the music to give it a different feel Press the PR-
ESET EQ button repeatedly to cycle through the following equalization modes.
ROCK
POP
FLAT (EQ OFF)
CLASSIC