Filter
Top Products
8
To set the clock time:
1. Plug the product into a standard 120V AC electrical outlet.
2. To set the current clock hour(s):
a. Press and hold the TIME Button.
b. Press the HOUR Button until the desired hour(s) is reached.
A red dot appears in the clock LED display next to PM to indicate Post Meridiem hours.
c. Release the TIME Button.
3. To set the current clock minute(s):
a. Press and hold the TIME Button.
b. Press the MIN Button until the desired minutes(s) is reached.
c. Release the TIME Button.
To set and use the alarm function:
The alarm may be set to wake up to an alarm buzzer or the radio.
All alarm functions are deactivated when the ON/OFF/AUTO Switch is set to the ON position, as
the radio is in use.
1. Ensure the current time is set.
2. Set the alarm time:
a. Press and hold the AL. SET Button.
b. Press the HOUR Button until the desired hour(s) is reached.
c. Press the MIN Button until the desired minute(s) is reached.
d. Release the AL. SET Button.
3. Slide the ON/OFF/AUTO Switch to the AUTO position.
A red dot appears next to AL in the clock LED display.
4. Select the alarm sound (to awake by):
• To wake up to the alarm buzzer:
a. Rotate the VOLUME Knob until it clicks into the BUZZ position.
b. The alarm buzzer will sound at the set alarm time.
• To wake up to the radio:
a. Rotate the VOLUME Knob to the desired volume level.
b. Tune the radio to the desired bandwidth (AM or FM) and broadcasting station.
c. The radio will sound at the set alarm time.
5. To silence the alarm, press the AL. OFF Button.
6. The alarm remains set to sound again the next day at the set alarm time.
7. To deactivate the alarm, slide the ON/OFF/AUTO Switch to the OFF position.
The red dot in the clock LED display (next to AL) disappears.
To use the snooze function:
The snooze function can be used to silence the alarm for nine (9) minutes once activated. When the
buzzer or radio alarm sounds, lightly touch the SNOOZE Button.
NOTE: The SNOOZE Button operates the snooze function only when the ON/OFF/AUTO Switch
is set to the AUTO position.